• GMGB – Opp. ONGC Colony, Palavasna, Mehsana – 384003.
• Bhavnagar- Gujarat Mine Chem, 234-235, GIDC Chitra, Bhavnagar-364004. Ph. No. : 0278 – 2445530, 2447069.
  
• Bhuj- Manek Minerals, 2-1 Bhujodi, Bhuj- 370001. Ph. No. : 02832 – 24189, 240699.

Gujarat Multigas Base Chemicals Pvt. Ltd.
Opp. ONGC Colony, Palavasna,
Mehsana : 384003
Gujarat - India
Tel. No. :+91-2762-251265,251270
Fax No. :+91-2762-252582
Email : manekmin@sancharnet.in

• Furnace.
  
• S.S. & MSRL Reactors.
  
• Filter Presses.
  
• Spray Driers.
  
• Flash Driers.
  
• Tray Driers.
  
• Rotary Driers.
  
• Pulverisers.
  
• Granulator.
  
• Noodlers.
  
• Extruders.

• PPTS: The two basic raw materials sand & soda ash are mixed in a definite ratio and are charged in to the furnace to produce sodium silicate. Sodium silicate is then dissolved in water at high temperature and pressure to get liquid S.S. It is reacted with concentrated Sulphuric acid to get silica in the firm of suspension. Then the suspension is filtered to get silica in cake form. Silica cake is converted in to slurry by mixing with Dilute-Sulphuris acid. Slurry, which is the spray dried silica is then either milled or granulated as per the customers requirement and application of the product.
• Bleaching Earth: Bentonite and sulphuric acid are mixed to produce the slurry. It is then filtered. The cake thus produced is dried. Dried material is pulverised to get the product of requied pactical size.
• Zeolite: Sodium Aluminate is reacted with sodium silicate. The mass is then crystallized & filtered & the cake thus produced is dried in flash drier and then it is packed.
• Activated Alumina: ATH powder is flash calcinated. Calcinated powder is then pulverized and taken into nooduliser. The material thus produced is subjected to soaking for certain time. The mass is then dried in tray dier. After drying, the powder is sieved. After sieved, it is then Calcined.
  
• Molecular Sieves: Zeolite powder is mixed with the bindng clay and is then either extruded or noodulised based on the shape/form of the product. The mass is then tray dried. Dried material is then sized and sieved . After sieving, material is Calcined under closely controlled parameters of temperature flow etc.

• Sand
  
• Soda Ash
  
• Sulphuric Acid
  
• Ammonia

• Bentonite
  
• Sulphuric Acid

• Sodium Aluminate
  
• Sodium Silicate

• ATH (Alumina Tri Hydrate)

• Caustic Lye
  
• Aluminum Oxide
  
• Sodium Silicate
  
• Bentonite
  
• Kaloine
  
• Potassium Chloride
  
• Calcium Chloride
  
  All the above mentioned raw materials ensures reasonability of supply rates.

• Advantages – We are the only company in our country or perhaps in the world, which has direct access to key raw materials and minerals to the most integrated manufacturing facility for precipitated silica , molecular sieves and bleaching earth. We also have the unique advantage of the GAS as a fuel which is the cleanest and most environmental- friendly fuel in our country. It also imparts some advantages to our products in terms of brighter colour due to absence of contaminations which are generally associated with other liquid fuel form for furnaces.
• Recent Development – As a result of major capacity expansion, we are the only company in this country manufacturing all grades of Precipitated Silica Thickening abrasive grade for tooth paste, granular grades for tyres all across the country.On the human resources front , technologists with decades of experience and knowledge of global market in this line have been inducted.